|
Post by MBEngineering on Nov 27, 2007 13:19:03 GMT -5
HI , Found my old drawings of the gear linkage, when I fitted the rod-change box to the car, some modes are required to the rod coming out of the box, If this lot is not to clear, drop me a PM and I will send you a copy if required, the linkage is in this car, I will see if I can find the photos of the back of the car , to show the linkage, (in the loft) regards mike
|
|
|
Post by pistol on Jan 20, 2008 14:57:59 GMT -5
hi there any chance of photos yet
|
|
|
Post by MBEngineering on May 25, 2009 5:54:41 GMT -5
|
|
|
Post by Terrapin on Dec 21, 2009 3:12:03 GMT -5
A different approach to resolving the linkage on a rod box Attachments:
|
|
scott
New Member
Posts: 2
|
Post by scott on Oct 26, 2010 3:32:00 GMT -5
Hi Terrapin I notice your linkage goes directly under the box unlike MBengineering, how do you connect to the box?
|
|
|
Post by Terrapin on Oct 26, 2010 9:48:09 GMT -5
Scott , the linkage goes under the gearbox and then up vertically and is welded to the standard bush (from standard rod linkage) which connects to the rod emerging from the gearbox. See similar in the Mini GTM article (towards end) ... www.turbominis.co.uk/forums/index.php?p=vt&tid=202876
|
|
scott
New Member
Posts: 2
|
Post by scott on Oct 26, 2010 13:29:04 GMT -5
Rob thank you, great link and solves my problem I have been puzzling over this for a while now, one of the last bits to get my car going.
|
|